JDS Uniphase RX3 Series, User Manual

Page: 18 / 55

5
Specifications
The following optical specifications describe the warranted characteristics of the instrument
(Table 3). Supplementary specifications describe the typical non-warranted performance of the
instrument (
Error! Reference source not found. ).
Table 3: Optical Specifications
Parameter Single-Mode (SM) Multimode (MM)
Operating wavelength 1310, 1480, 1550, 1625, 1650
±10 nm
850, 1310, 1550 ±10 nm
Outputs 1, 4, 8, 12, 16, 20, or 24
Detector type 2 mm In GaAs, 5 mm Ge
8
, 10 mm InGaAs, 3 mm InGaAs, 5 mm
Ge
8
, 10 mm InGaAs
Power range
1
3 to -80 dBm, 3 to – 40 dBm, -5 to -40 dBm, 3 to -60 dBm, 3 to -40
dBm, 5 to -40 dBm
Relative power accuracy
5, 9
±0.15 dB
6
±0.15 dB
7
Relative power accuracy
(5 dB range)
5, 9
±0.05 dB
6
±0.15 dB
7
Backreflection range
1,2,9
0 to -75 dB 0 to -40 dB
Relative backreflection accuracy
3, 9
±0.4 dB
4
±0.7 dB
Relative backreflection accuracy
(5 dB range)
3, 9
±0.3 dB
4
±0.7 dB
Absolute power accuracy ±0.25 dBm typical at -10 dBm
Backreflection resolution 0.1 dB
Power resolution 0.01 dB
Input voltage 100 to 240 V AC, 50 to 60 Hz
Operating temperature 0 to 40 °C
Storage temperature -40 to 70 °C
Dimensions (W x H x D)
single output
multiple output 36 x 15 x 31 cm
48 x 15 x 31 cm
Weight
single output
multiple output 10 kg
12 kg
1. Depending on the measurement setup, measurements with lower levels are possible at reduced accuracy.
2. Reduced backreflection accuracy in the last 10 dB of range based on termination effectiveness. Depending on
the measurement setup, measurements with lower levels are possible at reduced accuracy.
3. Following user-calibration procedure at recommended interval.
4. For a typical application, add ±0.4 dB for readings between -60 and -67 dB. Add ±0.8 dB for readings between -
67 dB and -72 dB. Add ±1.5 dB for readings between -72 and -75 dB.
5. Immediately after performing a dark measurement.
6. Add ±0.1 dB between 0 and 3 dBm and in the last 10 dB of the range.
7. Add ±0.1 dB between 0 and 3 dBm and in the last 5 dB of the range.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com