Chapter 3 Testing
Assessing WiFi performance throughout a site
WiFi Advisor Wireless LAN Analyzer User’s Guide
December 2014
22073751, Rev. 002
Page 31
3
Select Two-Ended Site Assessment.
The Settings page appears.
4
If needed, specify the settings as described in
5
Select Next... to initiate the Site Assessment test.
6
After the first location is tested, a green check mark or red “X” (a Go/No Go
result) appears next to the access point and station.
7
If you have another station, select Next Station Location. If not, go to
.
The other station must be another WiFi Advisor that is registered with the
App.
8
When finished testing, select Finish and Closeout. The Finish Test window
opens.
9
Enter the Customer Address. This appears in the closeout report.
10
To finish the closeout, save the results to a current job or a new job.
See
