Chapter 3 Testing
Assessing WiFi performance throughout a site
WiFi Advisor Wireless LAN Analyzer User’s Guide
Page 28
22073751, Rev. 002
December 2014
Step 3: Specifying the configuration
The configuration page specifies the profile(s).
To specify a configuration
1
From the Site Assessment page, select Configuration.
2
Do one of the following:
–
Select the pre-defined configuration that matches your needs or matches
the equipment you are installing into the test site. Proceed to
Specifying the AP and Station Location” on page 30
.
–
If no pre-defined configuration matches your needs, touch Add Configu-
ration.
The New Configuration page appears.
3
In the box at the top, specify a name for the configuration.
At the bottom, a graphical representation of the network appears.
