13
User manual
4- Milk handling
When the milk tank is nearly empty, the display on the paired
coffee dispenser will show
a message indicating that the
container must be refilled. Use the following steps to refill the
milk tank:
1. Open the door and slide the tank out partially, then pull the
milk suction tube out of the tank lid (See Fig.1).
2. Remove the milk tank lid and refill it with up to 4 litres of
chilled milk (See Fig.2).
Caution:
Always store extra milk packs in a separate
refrigerator at 2-5ºC for at least several hours to
achieve best results and to prevent spoilage.
3. After refilling, replace the lid and replace the milk tank back
partially into the fridge, then reinsert the milk suction tube
into the tank fully. Slide the milk tank back fully into the
fridge and close and lock the door (See Fig.3).
Note:
Always observe basic food safety and personal
hygiene, always wash hands before handling milk or
the milk tank.
Note:
As an option, the Milk Master Pro can be used with
sealed milk packs (Tetra Pak or similar) instead of
the milk container. In this case, the daily milk tank
cleaning is not required, though the milk tank
should be stored close by since it will still be used
for the cleaning with tablet function. When using
milk packs instead of the milk tank, simply open the
milk pack and insert the milk suction tube into the
pack, making sure that it extends to the bottom of
the pack. As always, make sure the pack is clean and
no contaminants are able to enter the milk pack to
maintain good hygiene and prevent milk spoilage.
4.1 Refilling the milk tank
PN: 1665189_01
Fig.1
Fig.2
Fig.3
i
i
