background image

10

User manual

4- Dispenser start up & storage

4.1 Dispenser start-up

4.2 Dispenser storage

A

A

B

B

D

C

•  Place the dispenser on a flat horizontal surface designed to support the operational weight of the 
dispenser.
•  Connect the water inlet hose (A to A), and then open the water tap/filter (B to B). Check for leaks.
•   Connect the power cord (C to C), and insert the power plug in the wall socket (D to D), the dispenser will 

start automatically, fill up and heat the boiler, and begin to chill the cooling compartment. Drink delivery 
will be blocked until the water in the boiler has reached the correct temperature.

Take the following preparations when the dispenser will not to be used for a long period (e.g.- holidays):
•  Remove the product packs and check the expiry date, if they will soon expire they should be disposed of.
•   Store opened product packs in a refrigerator until you switch the dispenser back on and it has cooled 

down again. If the expiry date has passed, the packs should be disposed of. 

•  Empty powder ingredients and clean the mixer components.
•  Clean and flush the dispenser.
•  Disconnect the power plug from the socket.
•  Close the water tap.

Note:

It may take 24 hours or more for the cooling compartment to cool down completely.

Note:

If the dispenser has been shut down for a longer period, the date and time must be reset so the 
programmed cleaning cycles and ECO settings are reactivated.

i

i

D

C

Summary of Contents for EXCELLENCE COMPACT TOUCH









































Reviews: