JDE Cafitesse 120 Next Generation, Operator'S Manual

Page: 61 / 61

Fig. A1 Fig. A2 Fig. A3
APPENDIX.A.-.CLEANING.THE.WATER.TANK.(OPTION)
Cleaning.the.water.tank.(option)
Pull the power plug out of the
socket.
Unscrew the closure of the water
tank (fig. A1).
Remove the pump unit (fig. A2).
Clean the pump unit by means of a
soft brush and rinse it several times.
Empty the water tank, rinse it twice
with hot drinking water and fill it with
drinking water (19 l).
•
•
•
•
•
Caution:
Fill the tank with cold drinking
water only (max. 30°C).
Observe local regulations
regarding the drinking water
quality (fig. A3).
Insert the pump unit into the water
tank and close it with the closure.
Note:
Make sure that the hoses are not
bent.
Insert the power plug and check the
correct functioning.
•
•
Caution:
The water tank must never be
subjected directly to sunlight.
Caution:
The kit water tank must only be
applied as a temporary and not
as a permanent installation.
Caution:
The water tank must be filled with
new drinking water every day.
Caution:
The pumps in the tank must
always be covered with water.