JCM TAIKO, Service Manual

Page: 69 / 104

4-7
TAIKO Service Manual
CHAPTER
4
© 2006 Japan Cash Machine Co.Ltd. All rights reserved.
4-2-3. Writing Serial No.
When replacing CPU board, follow the steps below and write Serial No..
1. Refer to 4-1-2. Connecting Procedure to identify the tool, the harness connection and
DIP Switch Settings.
2. Double click SerialNo.exe and then the following window will appear.
3. Click [Read Serial Number] button and then 6-digit of current serial number will be
displayed in the box next to the button. When the CPU board is new, nothing is dis-
played in the box.
4. Enter 6-digit of new serial number in the input box next to the [Write Seiral Number]
button.
Example: If the serial number is 03050438058, enter the last 6-digit 438058.
5. Press the [Write Serial Number] button to start writing Serial No.When writing Serial
No. method is completed, TAIKO LED will blinks color Blue.
6. Press the [Exit] button to close the window.
Current Serial No.
New Serial No.
- When writing Serial No. to Taiko by SerialNo.exe, Serial No.
will be set as the Encryption Code .