1248060 / 1.5
ROLL868 DMR / ROLL868 DMR-P
4
· The instructions for using this equipment must remain in the possession of the user.
· European door normative EN 12453 and EN 12445 specify the following minimum protection and door safety levels:
for equipment for residential, commercial and light industry use, prevent the door from being able to come into contact with any
object or limit the contact force (e.g. safety edge).
IMPORTANT SAFETY INSTRUCTIONS FOR USE
· Do not allow children to play with the door controls.
· Keep the remote controls out of the reach of children.
· Watch the door movement and keep people away until the door is fully open or closed.
· Precaution when operating the manual unlocking device, as the door may suddenly fall due to the bad condition of the springs or
door unbalance. Details on how to use the manual unlocking device must be provided by the manufacturer or the device installer.
· Examine the installation frequently, especially the cables, springs and supports, to detect signs of wear, damage or unbalance. Do
not use the door if repair work or adjustments are required, as this may cause damage.
JCM TECHNOLOGIES, S.A.,
declares that this
ROLL868 DMR, ROLL868 DMR-P
is in compliance the essential requirements
of the Machinery Directive 2006/42/EC and the EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and same as the
requirements of the R & TTE1999/05/EC .
CE DECLARATION OF CONFORMITY
See website www.jcm-tech.com
