P/N 960-000169R_Rev. A {EDP #217859}
© 2012, Japan CashMachine Co., Limited
8
VEGA-RC Twin™ Series Banknote Recycler Integration Guide
Table 7
VEGA-RC Twin Recycler to Acceptor Receptacle Pin Assignments
*
Post with Base (Side Type): S14B-PHDSS-B (JST)
Housing: PHDR-14VS
Contact: SPHD-002T-P0.5 / AWG#24-28
Recommended Wire: Slit Wire
Signal Line: UL1061 AWG#28 / Power Supply Line: UL1061 AWG#24
Pin No.
Signal Name
I/O
†
Function
1
S GND
-
Signal GND
2
S GND
-
Signal GND
3
VEGA - TXD (DL-TTL)
OUT
Serial data signal output line from Recycler to Acceptor
(both DL-TDX signals used)
4
VEGA - RXD (DL-TTL)
IN
Serial data signal input line from Recycler to Acceptor
(both DL-TDX signals used)
5
VEGA - ENC
IN
Serial data signal input line from Acceptor to Recycler
6
VEGA - PSI2
IN
Serial data signal input line from Acceptor to Recycler
7
VEGA - FRP
IN
Serial data signal input line from Acceptor to Recycler
8
VEGA - PSI1
IN
Serial data signal input line from Acceptor to Recycler
9
VDD
-
12V DC (24-36V DC)
‡
10
VDD
-
12V DC (24-36V DC)
‡
11
VDD
-
12V DC (24-36V DC)
‡
12
P GND
-
Power GND
13
P GND
-
Power GND
14
P GND
-
Power GND
*. Hot-swapping is prohibited (DO NOT plug the interconnect cable in or out of the unit while VEGA Unit’s power is ON!).
†. I/O (input/output) is the terminal as viewed from the Banknote Recycler’s backside.
‡. Voltages in brackets are optional specifications.
4 CONNECTOR PIN ASSIGNMENTS
Table 7 and Table 8 list the VEGA-RC Twin™ Unit’s pin assignments, respectively.
Table 7 lists the VEGA-RC Twin™ to VEGA™ Unit Receptacle connector pin assignments.
