JCG AC860 1900M DUAL BAND GIGABIT ROUTER
18
/
78
router.)
Netmask-
An address code that determines the size of the network. Normally
use 255.255.255.0 as default settings. For novice users, it is not recommended to
modify this setting.
MAC Address-
The physical address of the router, as seen from the LAN. The
value can't be changed.
DHCP Server-
Enable the DHCP server if you want the router to automatically
set the IP address for each computer. Select “
Off
” to manually assign an IP
address to each computer connected to the router.
Start IP Address-
Enter the IP address to start assigning an IP address via DHCP,
factory default: 192.168.1.1.
End IP Address-
Enter the IP address to end assigning an IP address via DHCP.
(The range of IP address assigned in your network must be within the range of
192.168.1.1 ~ 192.168.1.254.)
Default Gateway (Optional)
- It is suggested to input the IP address of the
Ethernet port of the router. The default value is 192.168.1.1.
DNS Server (Optional)-
Choose
“Static”
if you have the DNS IP address
provided by your ISP. This feature is set to
“Dynamic”
by default to enable these
entries to be automatically filled.
Primary DNS (Optional)
- Input the DNS IP address provided by your ISP or
consult your ISP.
Secondary DNS (Optional)
-
Input the IP address of another DNS server if your ISP
provides two DNS servers.
Lease Time-
Set the amount of time a network user will be allowed connection to
the router with their current dynamic IP Address. After the time is up, the user will
be automatically assigned a new dynamic IP address. The options of the time
range are 0.5 hour, 1 hour, 6 hours, 12 hours, 1 day, 1 week. The default value is 1
day.
6.2 WAN
Choose menu
“Network
→
WAN”
to configure the IP parameters of the WAN.
6.2.1
Static (Fixed IP)
If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,
select
Static IP (Fixed IP)
.
