www.jcgcom.com
20
Tip
1. Before WDS setup, select wireless network type as WDS or AP+WDS (AP+WDS is
recommended) in wireless setup-basic setup, set the channel as it of the corresponding
access point, click Apply and restart and further setup WDS.
6.6 WPS setup
WPS (Wi-Fi protection setup)
can allow your wireless network client to easily establish a
connection with the wireless network of the device within several seconds.
PBC mode
– the client and access point can establish an connection by pressing
WPS button within specified time (generally it is 2 min). It is also the simplest and most
convenient mode.
PIN mode
– the PIN code of the adder is inputted as a PIN of an added party. After
validated by the added party, a connection is established. Generally PIN code is a 8-digit
decimal number.
Tip: when the PBS mode is used for WPS encrypted connection, please notice WPS button
of the router and difference when 2.4G and 5G wireless WPS are enabled. The WPS
button of current JCG “Young” wireless router JYR-AC680 and JYR-AC580 are used as
follows: to click this button, 5G WPS function is enabled. To hold this button for over 5s, 2.4G
WPS function is enabled.
