www.jcgcom.com
18
remote, or the clients are limited, even reach one.
Beacon interval
--- beacon is the small data packets which are used by AP to synchronize
wireless network. The beacon interval indicates the interval of two beacons sent by AP.
Short collision slot
– it is used to shorten the communication time between AP and client.
BG protection
– a self-adjustment mechanism, which acts as 802.11B standard and can
allow the clients meeting different standard can collaboratively work.
Data packet convergence
– multiple smaller data packets are converged and transmitted
as one bigger data packet in order to reduce and control the occupied network bandwidth.
When the network environment is not good or the interference is severe, it can reduce the
network performance.
Transmission power
– it can adjust the RF transmission power of the wireless network to
increase or decrease the valid coverage distance and scope of a wireless network.
6.3 Security setup
Here a user can set the security mode and encryption type of a wireless network to prevent
unauthorized clients from accessing your wireless network.
Tip: when the key length is 64 in WEP encryption, please input 10 hex characters or 5
ASCII characters. When the key length is 128, please input 26 hex characters or 13 ASCII
characters.
This router provides wireless network password in the factory default setting, please refer to
the label on the rear side of the shell.
