CONTROL PANEL
–
DSE 7310
This button is only active in the STOP/RESET mode, MANUAL mode. Pressing the Start button in Stop/Reset
Mode powers up the engine’s ECU but does not start the engine. This can be used to check the status of the
CAN communication and to prime the fuel system
Used for navigating the instrumentation, event log and configuration screens.
Used to silences the audible alarm in the controller, de-activates the audible alarm output (if configured) and
illuminates all of the LED on the module’s facia as a lamp test function.
14
Please consult your manual for full information or consult your local dealer