background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526

CHARGING PROCEDURE

 

NOTE: 

Before using the  

tool, read the safety and 

operating manual carefully.

1. CHARGING YOUR 
BATTERY PACK

The battery charger supplied 
is matched to the Li-ion battery 
installed in the machine. Do not use 
another battery charger.
The Li-ion battery is protected 
against deep discharging. When 
the battery is empty, the machine 
is switched off by means of a 
protective circuit: The chuck no 
longer rotates.
In a warm environment or after 
heavy use, the battery pack may 
become too hot to permit charging. 
Allow time for the battery to cool 
down before recharging.
When the battery pack is charged 
for the first time and after prolonged 
storage, the battery pack will accept 
a 100% charge after several charge 
and discharge cycles.

2. BEFORE USING YOUR 
CORDLESS TOOL

Your battery pack is UNCHARGED 
and you must charge once before 
use. When you charge the new 
battery or one which has not been 
used for long periods of time, it may 
not reach full charge until after you 
have discharged it fully in use and 
recharged it several times.

Summary of Contents for JCB-SCH12Li

















Reviews: