background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526

1.  Before charging, read the 

instructions.

2.  If the supply cord is damaged, 

it must be replaced by the 

manufacturer, its service agent 

or similarly qualified persons in 

order to avoid a hazard.

3.  After charging, disconnect the 

battery charger from the supply 

mains. Then remove the battery 

pack.

4.  Do not charge a leaking 

battery.

5.  Do not use chargers for works 

other than those for which they 

are designed.

6.  Before charging, ensure your 

charger is matching the local AC 

supply.

7.  The charging device must be 

protected from moisture.

8.  Do not use the charging device 

in the open.

9.  Do not short out the contacts 

of battery or charger.

10. Respect the polarity “+/-” 
when charging.

11. Do not open the unit and keep 

out of the reach of children.

12. Do not charge the batteries of 

other manufactures or ill-suited 

models.

13. Ensure that the connection 

between the battery charger and 

battery is correctly positioned 

and is not obstructed by foreign 

bodies.

14. Keep battery charger’s slots 

are free of foreign objects and 

protect against dirt and humidity. 

Store in a dry and frost-free place.

15. When charging batteries, 

ensure that the battery charger 

is in a well-ventilated area and 

away from inflammable materials. 

Batteries can get hot during 

charging. Do not overcharge 

any batteries. Ensure that 

batteries and chargers are not left 

unsupervised during charging. 

16. Do not recharge non-

rechargeable batteries, as they 

can overheat and break.

17. Longer life and better 

performance can be obtained if 

the battery pack is charged when 

the air temperature is between 

18

o

C

 and 24

o

C

. Do not charge the 

battery pack in air temperatures 

below 4.5

o

C

, or above 40.5

o

C

This is important as it can prevent 

serious damage to the battery 

pack.

 

WARNING:

1)This appliance is not 

intended for use by persons 

(including children) with reduced 

physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they 

have been given supervision 

or instruction concerning use 

of the appliance by a person 

responsible for their safety.

2)Children should be supervised 

to ensure that they do not play 
with the appliance.

ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR BATTERY CHARGER

Summary of Contents for JCB-SCH12Li

















Reviews: