background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

Red flash

 -  -  -  -  -

Defective 
Battery

Green on

Fully Charged

Green flash

- -  -  -  -  -

Hot/Cold 
Delay

HOT/COLD BATTERY 
PACK DELAY

This charger has a HOT/COLD 
battery pack delay feature. When 
the charger detects a battery 
pack that is too hot or cold (the 
logo will be green and flash), 
it automatically starts a HOT/
COLD Pack Delay, and suspends 
charging until the battery pack has 
reached the correct temperature. 
The charging process will then 
automatically begin (the logo 
will be red). This feature ensures 
maximum battery life.

LEAVING THE BATTERY 
PACK IN THE CHARGER

If a fully charged battery pack is 
left in the charger, the logo will 
remain green. The battery pack 
will remain charging with a trickle 
current.

NOTE:

 A battery pack will slowly 

lose its charge when kept out of 
the charger or left in an unplugged 
charger for a long time. It may 

need to be recharged before use.

WEAK BATTERY PACKS

This charger will detect a weak 
battery pack. When a weak battery 
pack is inserted into the charger, 
the charger will try to repair it. This 
process will last about 30mins (the 
logo will be red). When the repair 
is finished, it will automatically 
begin to charge the battery pack to 
the highest capacity possible (the 
logo is red). If the logo becomes 
flash, indicating the battery pack is 
dead. 

NOTE: 

Repaired battery packs 

are still usable but should not be 
expected to perform as much work 
as new battery packs.

IMPORTANT CHARGING 
NOTES:

1. For a new battery or a battery 
that has been in storage for 
sometime, please recharge the 
battery before use. If you want to 
store the battery for a long time, 
please fully charge the battery 
pack to ensure maximum battery 
life.
2. Longer life and better 
performance can be obtained if 
the battery pack is charged when 
the air temperature is between 
18

o

C and 24

o

C. Do not charge the 

battery pack in air temperatures 
below 4.5

o

C, or above 40.5

o

C. 

Summary of Contents for JCB-FCH12Li

















Reviews: