JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
PROBLEM SOLUTION
I CANNOT FIT THE BATTERY INTO THE BATTERY CHARGER.
WHY?
a) Check if the charger and the battery pack are specifically designed for working
together.
b) The battery can be inserted into the charger only in one direction. Turn the battery
around until it can be inserted into the slot, the indicator light should be red when the
battery is charging.
REASONS FOR DIFFERENT CHARGING TIMES
The charging time can be affected by many reasons which are not defects in your
product.
a) If the battery pack is only partly discharged it may be re-charged in less than 1
hour.
b) If the battery pack and ambient temperature are very cold then re-charging may
take 1-1.5 hours.
c) If the battery pack is very hot it will not re-charge because the internal
temperature safety cutout will prevent it. If the battery pack is very hot you must
remove your battery pack from the charger and allow your battery pack to cool
first to ambient temperature and then recharging can be started.
MAINTENANCE
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or maintenance. Never use water or
chemical cleaners to clean your tool. Wipe clean with a dry cloth. Always store
your tool in a dry place.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authorities or retailer
for recycling advice.
