background image

SO53 3LE
Customer Helpline 0845 600 5526 Monday to Friday 09.00 to 17.00 
www.JCBdiy.com

WARRANTY STATEMENT

REGISTER NOW FOR YOUR EXTENDED JCB WARRANTY:

With the extended 3 year warranty JCB offers you additional protection which extends 
far beyond the legally required periods and warranty conditions.

This service is available to you at no cost if you register your new JCB outdoor product 
within 30 days of the purchase date.

All you need to do in order to receive this JCB service: register your machine online! 
At JCBDIY.COM

Our JCB service is only available within the U.K. & Ireland on Tel: 0845 600 5526

LIMITED WARRANTY:

JCB warrants this outdoor product to be free of defects in material or workmanship 
for 24 months from the date of purchase by the original purchaser, subject to the 
limitations below. Please keep your invoice as proof of date of purchase.

This warranty is only applicable where the product is used for personal and 
non-commercial purposes.

 This warranty does not cover damage or liability caused 

by/due to misuse, abuse, accidental or intentional acts by user, improper handling, 
unreasonable use, negligence, failure by end user to follow operating procedures 
outlined in the user’s manual, attempted repair by non-qualifi ed  professional, 
unauthorized repair, modifi cation, or use of accessories and/or attachments not 
specifi cally recommended by authorized party.

This warranty does not cover Spark plugs, Leaf collection bags, Chain saw chains 
& chain bar, Brush cutter blades, Line trimmer heads, nylon cable or any part which 
ordinary wear and tear results in required replacement during warranty period. Unless 
specifi cally provided under applicable law, this warranty does not cover transportation 
cost of consumable items.

This limited warranty is void if the product’s original identifi cation (trade mark, serial 
number, etc.) markings have been defaced, altered or removed or if product is not 
purchased from an authorized reseller or if product is sold AS IS and /or WITH ALL 
FAULTS.

Subject to all applicable local regulations, the provisions of this limited warranty 
are in lieu of any other written warranty, whether express or implied, written or oral, 
including any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. IN NO EVENT SHALL WE BE LIABLE FOR SPECIAL, INCIDENTAL, 
CONSEQUENTIAL DAMAGES. OUR MAXIMUM LIABILITY SHALL NOT EXCEED 
THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.

This warranty is valid only in the U.K. & Ireland 

JCB-CS38_Manual_D1.indd   35

JCB-CS38_Manual_D1.indd   35

11/12/2010   6:44:19 PM

11/12/2010   6:44:19 PM

Summary of Contents for JCB-CS38






































Reviews: