![background image](http://html1.mh-extra.com/html/jcb/hydradig-110w/hydradig-110w_quick-start-manual_3595533022.webp)
22
Please see operator manual for full details.
Troubleshooting/FAQs
Issue / FAQ
Resolution/Answer
My crab steer won’t select after
using 4WS
You must use 2WS first in order to re-align the rear axles
Why has the over speed warning shown
up on the display
The machine has either exceeded 20Kph or 40kph (dependant
on specification). If ignored, machine could go into “de-rate”
What happens if my machine goes
into “de-rate”
The machine speed will be restricted to 25% of the machines capability.
To reset this, key off and on.
I can’t enable slew lock
In order to enable the slew lock, the slew position sensor must be aligned
with the lower locating pin, in its central position. Alternatively, it could
be a keypad fault.
Can I open the Quick Hitch with the
attachment on the ground?
The Quick Hitch can be opened with the attachment on the ground (when
display prompts to crowd bucket, can press and hold rotary instead to open QH)
My 40kph machine won’t travel faster
than 20kph
Check that site mode is off and Highway mode is selected (Figure 14)
How do I operate the Quick Hitch?
Ensure that the hydraulics (2Go) are activated. Press and hold the Quick Hitch
button on Keypad 1 for two seconds. Acknowledge within 5 seconds by
pressing the “2Go” button. Crowd the bucket ram and stall for two seconds
or depress rotary select. Quick Hitch will release. To complete the process,
when the bucket is safely attached, press the Quick Hitch button.
How do I enable the Hand Held Tool
Circuit (HTC)?
Ensure that the hydraulics (2Go) are activated. Press and hold the HTC button
on Keypad 2 until HTC icon is displayed. Once HTC is displayed/activated the
side pod can be raised, keeping the HTC hydraulics active (work tool must
be connected prior to HTC selection)
What does it mean when my axle lock
is on “auto”
When the axle lock function is on auto, the machine will lock it’s axles
automatically when the footbrake is on (locked) and will disable once footbrake
is unlocked (for roading purposes).
Summary of Contents for Hydradig 110W
Page 1: ...1 Hydradig 110W Quick Start Guide...
Page 23: ...HYDRADIG 110W 23 Your Notes...