Section 1 - General Information
1-11
1-11
9813/3850-1
Service Tools
Numerical List
The tools listed in the table are special tools required for
carrying out the procedures described in this manual.
These tools are available from JCB Service.
Some tools are available as kits or sets, the part numbers
for parts within such kits or sets are not listed here. For full
details of all tools, including the content of kits and sets,
see the relevant section in this manual.
Note: Tools other than those listed will be required. It is
expected that such general tools will be available in any
well equipped workshop or be available locally from any
good tool supplier.
Part
Number
Description
Tool Detail Reference
- see Section:
-
AVO Test Kit - see tool detail reference for content
C
-
Bonded Washers - see tool detail reference for content
E
-
Female Cone Blanking Plugs - see tool detail reference for content
E
-
Female Connectors - see tool detail reference for content
E
-
Hydraulic Flow Test Equipment - see tool detail reference for content
E
-
Hydraulic Hand Pump Equipment - see tool detail reference for content
E
-
Male Adaptors - BSP x BSP - see tool detail reference for content
E
-
Male Adaptors - BSP x NPT (USA only) - see tool detail reference for content
E
-
Male Cone Blanking Caps - see tool detail reference for content
E
-
Pressure Test Points - `T' Adaptors - see tool detail reference for content
E
-
Pressure Test Points - Adaptors - see tool detail reference for content
E
-
Rivet Nut Tool - see tool detail reference for content
B
825/10053
Pilot hose release tool - for quick-connect hose fittings
E
892/01160
Engine lifting bracket (2-off)
K
4104/1310
Hand Cleaner
B
460/15708
Flow test adaptor - Powershift - Other components required, see tool detail
F
716/30313
Test relay - with LED indicator
L
721/10885
Interconnecting cable - use with 892/01033
F
825/10035
Adaptor plate spanner - viscous cooling fan
K
825/10036
Fan coupling spanner - viscous cooling fan
K
892/00011
Spool Clamp
E
892/00167
Ram Protection Sleeve for 90 mm Rod Diameter
E
892/00180
Seal Fitting Tool - Hydraulic Steer Unit
H
892/00181
Replacement Plastic Boss for 892/00180
H
892/00252
Test Block for Loader Valve A.R.V. (214e & 3C Machines Only)
E
892/00253
Hydraulic Pressure Test Kit - see tool detail reference for content
E, F