background image

BORDELET INDUSTRIE S.A.S. NORTH-AMERICAN WARRANTY LIMITED 
WARRANTY 

The warranty of the manufacturer extends only to the original purchaser and is not transferable. It takes 
effect upon completion of the installation of the fireplace by an authorized qualified installer and a copy of 
the Installation, Operation and Maintenance Manual must be left with the original purchaser at the same 
time. This warranty covers only new products, which have not been altered, modified or repaired since 
leaving the factory. Proof of purchase (original dated invoice), model name and serial number must be 
supplied when making any warranty claim to the 

local Bordelet Industrie S.A.S. distributor. 

This warranty applies to normal residential use only. Damages caused by misuse, abuse, improper 
installation, lack of maintenance, over firing, negligence or accident during transportation, down-
drafts, or venting problems are not covered by this warranty. 

An authorized qualified installer must perform the installation in accordance with the instructions supplied 
with this product and all Local and National building codes. The installer must also verify that the chimney 
used to vent the products of combustion and all it supports and firebreaks meet all codes and standards and 
that the chimney’s base will be mounted on a JC Bordelet Load bearing Support which will also provide 
adequate mounting and support for the fireplace suspended from it. The authorized qualified installer will be 
held solely responsible for any improper installations not in conformance with the ULC-S610 and UL127 
standards and Local and National building codes, the supplied installation, operation and maintenance 
manual and shoddy or negligent workmanship.  

The manufacturer may require that defective products be returned to the 

local Bordelet Industrie S.A.S. 

distributor

 to support the claim. Returned products are to be shipped prepaid to the distributor for 

investigation. If the product(s) is/are found to be defective, 

Bordelet Industrie S.A.S. 

 will, at their option, 

repair or replace such defective product(s). The product(s) will be shipped back to the original purchaser 
freight collect. Repair work done under warranty, executed at the original purchaser’s home by an 
authorized qualified installer requires the prior approval of the 

local Bordelet Industrie S.A.S. distributor

.  

Bordelet Industrie S.A.S. 

and it’s distributor will not be liable for any and all labour and traveling or 

shipping costs associated with the repair, removal, reinstallation of any one of it’s fireplaces or individual 
component nor administration fees incurred by the original purchaser.  

The manufacturer, 

Bordelet Industrie S.A.S.,

 at its discretion, may decide to repair or replace any part or 

unit after inspection and investigation of the defect. Additionally, 

Bordelet Industrie S.A.S. 

may, at its 

discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of any 
warranted but defective parts. 

Bordelet Industrie S.A.S. 

shall in no event be responsible for any special, 

indirect, consequential damages of any nature, which are in excess of the original purchase price of the 
product. 

WARRANTY COVERAGE 

Five Years from date of installation: 

All components incorporated in the fireplace at the factory. 

One Year from date of installation: 

Heat deflectors, ash grille, decorative trims and surrounds, the expanded metal mesh firescreen. 

EXCLUSIONS: 


This warranty does not cover any corrosion due to a saline or corrosive environment, distortion, scratches or 
discoloration due to over firing, damages incurred during shipping, nor any damages caused by improper 
assembly or mounting or improper use of the fireplace. Any defect or damage caused by the use of 
unauthorized parts or other than original parts void this warranty. Any service call related to an improper 
installation or use is not covered by this warranty. 

 

 

Page 16 

Summary of Contents for Tatiana 997CFO
























Reviews: