![background image](http://html2.mh-extra.com/html/jbsystems-light/party-bar/party-bar_operation-manual_3531732011.webp)
ENGLISH
USER MANUAL
JB SYSTEMS®
9/87
PARTY BAR
Use the [UP/DOWN] buttons to select the desired DMX-mode. (3CH, 5CH, 6CH, 9CH or 27CH)
Press the [ENTER] button to confirm your choice.
Now you can use the [UP/DOWN] buttons to set the DMX address. [dxxx]
Press the [ENTER] button to confirm your choice.
Note:
the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light
equipment. You need to “daisy chain” your DMX controller and all the connected light
effects with a good quality XLR M/F balanced cable. To prevent strange behavior of
the light effects, due to interferen
ces, you must use a 90Ω to 120Ω terminator at the
end of the chain. Never use Y-
splitter cables, this simply won’t work!
Each effect in the chain needs to have its proper starting address so it knows which commands from the
controller it has to decode.
3 CHANNEL DMX-CONFIGURATION:
DMX
Channel
DMX-
value
function
remarks
1
000-009
Blackout
010-031
Auto Par
Automatic show of the RGB projectors & derby only
032-065
Auto Laser
Automatic show of the laser effect only
066-095
Auto Flash led
Automatic show of the
white flash led’s only
096-127
Auto Mix
Automatic show of all the effects
128-159
Sound Par
Sound controlled show of the RGB projectors & derby only
160-191
Sound Laser
Sound controlled show of the laser effect only
192-223
Sound Flash Led
Sound controlled show of the
white flash led’s only
224-255
Sound Mix
Sound controlled show of all the effects
Channel 1 = Auto Par mode
(DMX value between 010 and 031)
2
000-009
AP01
Different automatic RGB Projector & Derby modes
010-019
AP02
020-029
AP03
030-039
AP04
040-049
AP05
050-059
AP06
060-069
AP07
070-079
AP08
080-089
AP09
090-099
AP10
100-109
AP11