ENGLISH
USER MANUAL
JB SYSTEMS®
8/87
PARTY BAR
5) CONTROLLED VIA THE IR REMOTE CONTROLLER:
The PARTY BAR can be controlled by the supplied IR remote control
AUTO MIX
press the button to select one of the different
mixed automatic shows: AM01, AM02, ….
SOUND MIX
press the button to select one of the different
mixed sound controlled shows: SM01, SM02,
ON/OFF
press the button to start up the effect bar or
to put the bar in standby mode
COLOR
press these buttons to select the previous
(left button)
or the next color (right button)
EFFECT
PAUSE
press the button to pause (freeze) the
running effect
RGB LED
ONLY
Each time you press this button you will
activate another RGB LED program. The
other effects are switched OFF
LASER ONLY
Each time you press this button you will
activate another Laser program. The other
effects are switched OFF
WHITE FLASH
ONLY
Each time you press this button you will
activate another Flash Led program. The
other effects are switched OFF
PROGRAM
SPEED
press number 0 to 9 to select the desired
speed for the automatic programs (not sound
controlled). 0= slowest, 9= fastest
SOUND / AUTO
When an individual effect mode is selected
with the buttons A, B or C (6), you can use
the red arrow button to put this individual
effect in Automatic mode or Sound controlled
mode
Not used
6) CONTROLLED VIA DMX:
The PARTY BAR can be controlled by any standard DMX-controller in 5 different DMX-modes:
3 CHANNEL MODE:
for easy control over the automatic and sound modes
5 CHANNEL MODE:
to control only the RGB Led projectors and Derby effects
6 CHANNEL MODE:
for easy control over the automatic and sound modes + extra manual
RGB control of the projectors
9 CHANNEL MODE:
basic manual control over each group of projector type
27 CHANNEL MODE:
full manual control over each individual projector.
Connect the DMX input of the PARTY BAR to the DMX output of the previous unit in the chain or
directly to the DMX-output of your controller.
Press the
[MENU]
button until the display shows: “DMX”.
Press the [ENTER] button to enter this option
The actual DMX address is shown on the display.
Press the [ENTER] button again to set the DMX settings
You can now change the DMX mode
