ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
1/12 MIRRORBALL MB30+MB40+MB50
OPERATION MANUAL
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities and for your own safety, please
read these operating instructions very carefully before you start using this unit.
FEATURES
This product meets the requirements of the current European and national guidelines. Conformity has been established
and the relevant statements and documents have been deposited by the manufacturer.
This device has been designed to produce decorative effect lighting and is used in light show systems.
Mirror ball with plastic core.
Second security ring.
Real glass mirrors
Mirror size: 10x10mm
BEFORE USE
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do not use the
device and consult your dealer first.
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to
strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not
subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by
disregarding this user manual.
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
Check the contents:
Check that the carton contains the following items:
Operating instructions
MB30/MB40/MB50
SAFETY INSTRUCTIONS:
This symbol means: indoor use only.
This symbol means: Read instructions.
To protect the environment, please try to recycle the packing material as much as possible.
This unit is for indoor use only.
Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object
enters the unit, immediately disconnect the mains power.
Prevent use in dusty environments and clean the unit regularly.
Keep the unit away from children.
Inexperienced persons should not operate this device.
Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
The housing and the lenses must be replaced if they are visibly damaged.
Please use the original packing when the device is to be transported.
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Always use an appropriate and certified safety cable, connected to the second safety eye, when installing the unit.
Important:
Never look direct
ly into the light source! Don’t use the effect in the presence of persons suffering from
epilepsy.
