6
media
Possible errors during connection establishment
If the LED flashes in red during connection establishment then there is an error. The
number of times it flashes in red gives information about the error source.
•
1x
Blinking: the network name (SSID) is wrong
•
2x
Blinking: the passphrase is wrong
•
3x
Blinking: the access point is set to mixed mode (WPA+WPA2)
•
4x
Blinking: the access point is set to WEP or Open
To delete the credentials you have entered, set the device back to factory defaults and
start over.
Reset to factory defaults
To reset the Light-Manager to factory defaults please proceed as follows:
•
Disconnect Light-Manager from power
•
Keep button at the front of the Light-Manager pressed gently
•
Connect AC adaptor
•
Wait until the LED flashes red
•
Release the button
