jbmedia Light-Manager Air, Quick Start Manual, Page: 14 / 24

14
media
The Light-Manager allows getting a notification by e-mail when a scenario has been
executed. This is especially suitable for scenarios which are triggered by sensors. So you
could get an e-mail as soon as a window or a door has been opened or motion has been
detected. If you want to go a step further you can also enter the address of an SMS
provider. Then you will get an SMS notification on your phone within a few seconds
worldwide. This can be very useful for alarm events.
It is possible to configure two
different e-mail addresses, one
for standard notifications and
one for alarm notifications with
higher priority. These
addresses can be entered
under
Options -> Light-
Manager setup -> E-mail
setup .
You can activate the
notification feature by
selecting a scenario in the
table, and then from the edit
or context menu (right click) select Send e-mail (default) or Send e-mail (alarm) . Both
options can be enabled for the same scenario if desired. So one could send an e-mail to
two recipients or send one e-mail and one SMS.
Adding actuators