Gateway C102/C112 Reference Guide
Page 3
© JBM Electronics Co.
1-800-489-7781
www.jbmelectronics.com
C102/C112 I/O Diagram
Installing the Configuration Program
The following steps provide information on how to install the Configuration
Program onto your computer. The configuration program is used to create a
configuration file.
1. The Configuration program is available on the JBM website
www.jbmelectronics.com
. This program is a self-extracting file.
2. Using the root drive of a DOS compatible PC, execute the zip file that
comes on this CDROM under the ‘Programs’ section. Contact JBM
Electronics customer support to determine if there is an upgrade for the
application.
Important Information:
Unless otherwise instructed, use only the default
path and filenames at the root directory of the PC that will be used to
develope and load configurations onto the Gateway Unit. In order to retain
the integrity of all JBM programs, and ensure the proper functioning of the
Gateway Unit(s), default folders and filenames will automatically be
extracted from the configuration program executable as
JBMGATEW
.
