Gateway C102/C112 Reference Guide Page 24
© JBM Electronics Co.
1-800-489-7781
www.jbmelectronics.com
Establishing Console Access to the Unit
Note:
Before opening your terminal emulation program, please have the console
cable plugged into the 9-pin port on the
back
of the unit labeled
ttyS0 Console
(DCE)
and to an available COM port on your PC. Also make sure unit is plugged
in and receiving power.
Step 1: From the Windows Desktop click
Start > Run and type
“hypertrm.exe”
. This will start the Hyper Terminal application.
Step 2: Enter a name for the connection (Any alphanumeric combination is
acceptable) and select an icon to represent the connection. Click
OK
.
