background image

7

www.jbl.com

ENGLI

SH

lIStenInG to muSIc

There are three ways to listen to music on your JBL On Tour iBT:

 Via 

• 

Bluetooth

 technology from a 

Bluetooth

-enabled device.

 Using the supplied Apple cable to connect an iPad, iPhone or iPod device to the 

• 

JBL On Tour iBT’s USB 

port.
 Using a stereo 3.5mm audio cable (not supplied) to connect an audio device’s audio or headphone 

• 

output to the JBL On Tour iBT’s auxiliary 3.5mm mini jack.

To cycle through the sources, make sure the JBL On Tour iBT is not in the 

Bluetooth

 call mode and 

momentarily press the MFB “ ” button. Each press of the button changes to the next source. The source 
LED will change color to indicate the active source:

White = Apple cable (USB port)
Blue = 

Bluetooth 

(wireless)

Green = Auxiliary 3.5mm mini jack

lIstenIng to mUsIc From a 

Bluetooth

-enabled devIce

 Make sure the 

1. 

JBL On Tour iBT system is paired with your 

Bluetooth

-enabled device (see 

Bluetooth

 

Pairing

 section, on page 5).

 Press the 

2. 

JBL On Tour iBT’s MFB “ ” button until the Source LED lights blue constantly. This indicates 

that the 

Bluetooth

 input is selected.

 Go to the 

3. 

Bluetooth

-enabled device’s music player and play music. Refer to the 

Bluetooth

-enabled 

device’s user’s guide for directions and details about using its music player and transmitting music via 

Bluetooth

 technology.

 Use the 

4. 

Bluetooth

-enabled device to control playback. Adjust the volume using the “+” and “–” buttons 

located on the front of the JBL On Tour iBT unit.

lIstenIng to mUsIc From a connected ipad, iphone or ipod devIce

Plug the supplied Apple cable into the 

1. 

JBL On Tour iBT’s USB port, and plug your iPad, iPhone or iPod 

device to the cable’s 30-pin connector.

 

 Press the 

2. 

JBL On Tour iBT’s MFB “ ” button until the Source LED lights white constantly. This indicates 

that the Apple cable (USB) input is selected.

 Use the iPad, iPhone or iPod device to control playback. Adjust the volume using the “+” and “–” 

3. 

buttons located on the front of the JBL On Tour iBT unit.

note

: The JBL On Tour iBT will recharge the iPad, iPhone or iPod device while it is connected.

0288CSK - JBL On Tour iBT v10.indd   7

06/05/11   13:31:06

Summary of Contents for On tour ibT















Reviews: