background image

12

trouBleShootInG charGInG

symptom

possIble problem

solUtIon

note

Your iPod device or cell phone will not charge.

The wrong adapter is being used.

Make sure the correct adapter is being used for your 

specific iPod or cell phone model.

Some cell phones cannot charge via USB 

without software from the charging system.

trouBleShootInG paIrInG

symptom

possIble problem

solUtIon

note

The audio device does not pair with the 

JBL On Tour iBT system.

The audio device is not compatible with the  

JBL On Tour iBT system. 

Verify compatibility with the manufacturer.

The JBL On Tour iBT system is not powered on.

Press the Power button on the JBL On Tour iBT unit.

The blue LED should be flashing, indicating 

that the system is in the Discoverable mode.

The JBL On Tour iBT system is still paired to the 

Bluetooth

 transceiver.

Disconnect the transceiver from the iPod and turn the 

JBL On Tour iBT system power off, then back on.

The iPod battery is low.

Charge the JBL On Tour iBT system by following the 

battery charging directions in this Owner’s Manual.

If the amber LED on the JBL On Tour iBT unit is 

on, it is indicating a low battery.

0288CSK - JBL On Tour iBT v10.indd   12

06/05/11   13:31:07

Summary of Contents for On tour ibT















Reviews: