JBL On Air Control 2.4G, Service Manual

Page: 2 / 13

Service Note: Defective Control 2.4G systems should be exchanged under the
warranty period; the electronics are not serviceable down to component level
Order the following parts when needed:
Mechanical parts see pages 8,9,10
Powered Loudspeaker part#
CONTROL 2.4G-L
Passive Loudspeaker part#
CONTROL 2.4G-R
Transmitter part#
CONTROL2.4GLAUNCHE
- CONTENTS -
BASIC SPECIFICATIONS…………………….……………………..1
PACKAGING/ACCESSORIES……...…….………………………2
CONNECTIONS..…………………………….…………………….. 3
OPERATION ………….…………………….……..….….………….7
EXPLODED VIEW, Powered unit……………………………….…8
EXPLODED VIEW, Passive unit………………….….………….…9
EXPLODED VIEW, Transmitter………………….……….…….…10
WIRING DIAGRAM, SCHEMATIC……….……………………….11
BULLETIN JBL2007-01……...…….………………………………12
Control 2.4G BASIC SPECIFICATIONS
Frequency Range (±3dB): 50Hz – 20kHz
Amplifier Output: 15 Watts per channel
Low-Frequency Driver: 4" (101mm) magnetically shielded
High-Frequency Driver: 1/2" (12mm) Titanium-laminate, magnetically shielded
Operating Range: Up to 70' (21m) depending upon conditions
RF Operating Frequency: 2.4GHz
Dimensions (H x W x D): Speaker: 9" x 6-1/8" x 5-1/2" (229mm x 156mm x 140mm)
Transmitter: 1-1/8" x 4-7/8" x 3-7/8" (29mm x 124mm x 98mm)
(3-3/4" (95mm) High with antenna extended)
Weight
Active Speaker: 4.6 lb (2.1kg)
Passive Speaker: 4.3 lb (2.0kg)
Transmitter: 0.5 lb (0.2kg)
Occasional refinements may be made to existing products without notice but will always meet or exceed original
specifications unless otherwise stated
On Air™ Control 2.4G