background image

Who Is Protected by This Warranty? 

Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the
Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases
through military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated
bill of sale is presented whenever warranty service is required.

The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date
of the first consumer purchase. JBL amplifiers are warranted for three years from the date of original purchase. Enclosures and all
other JBL products are warranted for two years from the date of original purchase.

What does the JBL Warranty cover? 

Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered: Damage
caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage resulting from failure
to follow instructions contained in your Instruction Manual; damage resulting from the performance of repairs by someone not author-
ized by JBL; claims based upon any misrepresentations by the seller; any JBL product on which the serial number has been defaced,
modified or removed.

Who Pays for What? 

JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be  sure to save the original shipping car-
tons because a charge will be made if replacement cartons are requested. Payment of shipping charges is discussed in the next sec-
tion of this warranty.

How to Obtain Warranty Performance? 

If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service Department), 8500 Balboa
Boulevard, PO. Box 2200, Northridge, California 91329 (800/852-5776). We may direct you to an authorized JBL Service Agency or ask
you to send your unit to the factory for repair. Either way, you'll need to present the original bill of sale to establish the date of pur-
chase. Please do not ship your JBL product to the factory without prior authorization. If transportation of your JBL product presents
any unusual difficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible for trans-
porting your product for repair or arranging for its transportation and for payment of any initial shipping charges. However, we will pay
the return shipping charges if repairs are covered by the warranty.

Limitation of Implied Warranties 

ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE LENGTH OF THIS WARRANTY.

EXCLUSION OF CERTAIN DAMAGES 
JBL'S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT
INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE.

23

Warranty Statement

Summary of Contents for LSR6300 Series

























Reviews: