background image

3

I N T R O D U C T I O N

WELCOME

Welcome to EVO Intelligent Sound Reinforcement Systems.

Thank you for trusting JBL with your sound. It’s an honor we
don’t regard lightly. As a world leader in sound reinforcement,
JBL sound systems are permanently installed in many famous
arenas, concert halls, theaters, theme parks and clubs. In fact,
JBL speakers provide the body, substance and clarity for
today’s hottest music acts, showcase stores and premiere
restaurants you just can’t make a more professional choice.

JBL Professional products are the result of over 50 years of
design and manufacture of sound reinforcement solutions.
From cathedrals to discos, to arenas and small boutiques, JBL
has successfully provided the tools and system resources to
meet and exceed every need. It’s with this experience and suc-
cess that JBL offers EVO, the first fully designed sound rein-
forcement system with built-in intelligence. Congratulations
on your purchase.

USING THIS GUIDE

The majority of content in this Guide is instruction on the
day to day operation of EVOi.sys.  EVOi.324 and EVOi.net
are both components of EVOi.sys. It is necessary to retain the
Guides found in the EVOi.324 packaging. Operation of the
EVOi.net is contained in the EVOi.net Users Guide.  
A thorough understanding of these Guides is necessary for 
correct installation and set-up of EVOi.sys.

As you follow the EVOi.sys Users Guide each reference to
either EVOi.324 or EVOi.net Guide is identified with the
color associated with the product:
EVOi.sys   - 

Blue

EVOi.324  - 

Yellow

EVOi.net   - 

Green

PACKAGING CONTENTS

2 x EVOi.324 Contents:

EVOi.324 Speaker System
Accessory bag which includes: 

1 AC Power Cord, 1 Eyebolt Kit, Two 
Small Rubber Feet, 1 Large Rubber Foot, 
1 Large Washer

EVOi.324 Users Guide

Tech Note #14 Vol.1

EVOi.sys Mixer Station Contents:

EVO Mixer Station
AC Power Cord
UHF Handheld Transmitter with Dynamic 
Microphone Head with Clip
UHF Body Pack Transmitter with Condenser 
Lavalier Microphone with Tie Clip
Six Handheld Dynamic Microphones with Clips

EVOi.sys  Accessories Contents:

JBL Measurement Microphone with Clip
Four Boom Microphone Stands
Six 50 ft XLR Cables
Four 2 ft XLR Cables
Three 100 ft XLR Cables
Mixer Station Dust Cover
EVOi.sys, EVOi.net Users Guides

Summary of Contents for EVOi.sys





































Reviews: