JBL DCR600 II, Service Manual

Page: 9 / 127

9
¤
Video 1 Video Inputs: Connect to
PLAY/OUT composite or S-Video jacks on a
VCR or other video source.
‹
Video 1 Audio Inputs: Connect jacks to
the PLAY/OUT audio jacks on a VCR or other
video source.
›
Video 1 Video Outputs: Connect to
RECORD/INPUT composite or S-Video jack on
a VCR or other video receiver.
fi
Video 1 Audio Outputs: Connect to the
RECORD/INPUT audio jacks on a VCR or
other video recorder.
fl
Video 2 Video Inputs: Connect to
PLAY/OUT composite or S-Video jacks on a
cable television box, satellite receiver or other
video source.
‡
Video 2 Audio Inputs: Connect to
PLAY/OUT audio jacks on a cable television
box, satellite receiver or other video source.
°
Video Monitor Outputs: Connect to com-
posite or S-Video input of a TV monitor or
video projector.
·
TV Audio Inputs: Connect to output audio
jacks on your television or other video source.
a
Speaker Outputs: Connect to ma
and – terminals on front left/right, center, sur-
round left/right and subwoofer speakers.
NOTE: When making speaker connections
always make certain to maintain correct
polarity by connecting the colored (+) terminals
on the DCR600
II
to the red (+) terminals on the
speakers and the black (–) terminals on the
DCR600
II
to the black (–) terminals on the
speakers.
b
AC Power Cord: Connect the AC plug to
an unswitched AC wall output.
c
AM Antenna: Connect to the AM loop
antenna supplied. If an external AM antenna is
used, make connections to the
AM and GND
terminals in accordance with the instructions
supplied with the antenna.
d
FM Antenna: Connect to the supplied
indoor, or an optional external, FM antenna.
DCR600II