JBL A6000GTi, Service Manual, Page: 9 / 62

137159-1 Rev. 1 A6000GTi Service Manual

2003 Crown Audio, Inc.
Specification 2-1
2. Specifications
2.1. Output Power
A6000GTi Power Chart
Maximum power @ 100Hz With 0.1% THD
2 ohm Dual 3000W
4 ohm Bridged 6000W
1 ohm Parallel 6000W
Load Impedance: Safe with all types of loads. Rated for 2 ohms in dual mode, 4 ohms in
Bridged and 1 ohm in Parallel.
Required Battery Voltage: 10.0-16.0 VDC
DC Line Current:
For 6000W: 700A;
At idle: Amp draws 12.0A and no more than 200 watts.
2.2. Performance
Frequency Response: ±3 dB from 10Hz to 200Hz at 1 watt.
Phase Response: 0 to 180 degrees deviation from 20Hz to 320Hz.
Signal to Noise Ratio, A-Weighted, 20Hz to 320Hz: Better than 100dB below rated
100Hz power.
Total Harmonic Distortion (THD): 100Hz rated power 0.1% or less THD
Damping Factor: Greater than 1000 from 10Hz to 400Hz
Common Mode Rejection (CMR): Better than 70dB from 20Hz to 100Hz.