JBL A6000GTi, Service Manual, Page: 22 / 62

137159-1 Rev. 1 A6000GTi Service Manual

2003 Crown Audio, Inc.
Maintenance 4-3
8. Using a T-15 screwdriver, remove the two Torx-head screws on the display board.
Disconnect the ribbon cable from the back of the display board.
9. Using a T-15 screwdriver, remove the 23 Torx-head screws on the perforated
shield.
10. Using a small flat-blade screwdriver, disconnect the wiring for the neon tubes.
11. Remove the perforated shield and sheet metal shield (see Figure 4.3).
Figure 4.3 Perforated (EMI) Shield