JBL 4305P Owner'S Manual Download Page 8

EN

Pg 8 of 11

4305P OM | Part No: 950-0597-001 | Rev 1.0

© 2022 HARMAN International Industries, Incorporated. All rights reserved.

8. Other Modes

Protection Mode

The 4305P system is provided with different levels of protection, in the rare event that the system 

detects and internal malfunction, it will be represented by the selected Source icon to illuminate 

solid Red color. The system will remain in that state for as long as the protection event is present. 

(The example to the right, an issue has resulted while the Optical input was selected.)

Software Upgrades

•  Software upgrades are automatic, as long as the system is connected to an active network.
•  If a valid update is available, the unit will automatically start the update process which will be 

indicated by the Power LEDs to illuminate and flash Purple in color.

•  When completed, the Power LEDs will return to previous status and normal operation will 

resume.

Speaker Detection

When powered, if the 4305P system does not detect wireless or wired connectivity between the 

Primary and Secondary speakers, Both Power LEDs will illuminate solid Yellow color. 
Check your connections as outline in the Speaker System Set-up in Section 4. 

(The example to the right shows no associated speaker detected and primary speaker connected 

to a network.)

Tethered High Resolution Audio Mode – 192kHz / 24bit Connection

When a wired / tether connection via the Digital Link / Cat6 cable is detected between the Primary 

and Secondary speaker, Both Power LEDs will illuminate in solid White color. 

Wireless Audio Mode – 96kHz / 24bit Connection

When the Primary and Secondary speaker are connected wirelessly, Both Power LEDs will 

illuminate in solid Green color. 

MQA Content

The 4305P system supports MQA (Master Quality Authenticated) technology, as such has the ability to 

playback MQA audio streams.

When Streaming source has been selected and an MQA file has been detected in playback, the Streaming 

source LED will indicate the type of MQA file being played back by the following color changes:
•  Streaming Source LED illuminated in solid Green = Genuine MQA file

•  Streaming Source LED illuminated in solid Blue = MQA Studio
•  Streaming Source LED illuminated in solid Magenta = MQB and is only rendering.

POWER

NET

SOURCE/PAIRING

/

VOL

MUTE

UME

Solid

Primary Speaker 

NET

VOLUME

SOURCE/PAIRING

POWER

Primary Speaker 

Secondary Speaker 

NET

VOLUME

SOURCE/PAIRING

POWER

POWER

Primary Speaker 

Secondary Speaker 

NET

VOLUME/MUTE

SOURCE/PAIRING

POWER

POWER

Secondary Speaker 

NET

VOLUME

SOURCE/PAIRING

POWER

POWER

FLASHING

FLASHING

Primary Speaker 

Secondary Speaker 

Summary of Contents for 4305P













Reviews: