jbc JTQ, Instruction Manual

Page: 14 / 20

TC
Suction
OK
17:14
20 ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp.
Air Flow Selec.
TC
Suction
OK
17:14
20
ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp.
Air Flow Selec.
JTT
TET
JT
TE
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
TC
Suction
OK
17:14
20 ºC
Power
45%
120ºC Selected
TC
Temp.
4m 38s
400
ºC
80
%
400ºC Selected
Protection
Hot Air Temp.
Air Flow Selec.
Only perform this operation when the element is cold and the unit is disconnected from the mains.
1.
Loosen the screw.
2.
Pull the heating element out of the handle.
3.
Connect the new heating element, ensuring it is pushed all the way in.
4.
Tighten the screw.
Replacing the Heating Element
JTT Heater Hose Set
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)
Heating Element for JTT
Ref. 0014107 (230V)
0014105 (100V / 120V)
Handle for JTT
Ref. JT-A
(100V / 120V / 230V)
1.
Unplug the power cable.
2.
Use a spanner to unscrew the nut.
3.
Make sure that the new heater tube fits into
the grooves in the socket.
4.
Tighten the screw.
Changing the JTT Heater Hose Set
14