16
B0001
Grips for B·IRON Handles
Replacing Sealing Plugs
1. Cutting
2. Removing
B·IRON 500 TOOL
Precision Handle
Replacing Handle Grips
Make a length-ways cut on the worn grip.
Be careful not to damage the handle.
Remove the worn grip.
3. Assembling New Handle Grips
Firmly slide the grip onto the handle until it locks into place.
Cutter
Note:
Depending on your handle model, two
different sealing plug references are available.
Before replacing the sealing plug, disconnect
the handle from the station and make sure the
device is not hot.
Handle
Sealing Plug
B·IRON 100 TOOL
OB4000
B·IRON 500 TOOL
B·NANO TOOL
OB5000
The sealing plug prevents undesirable flux vapors or particles from entering the handle. Its usage is
highly recommended for intensive applications when soldering is exposed to FOD environments or
for applications where the soldering iron works close to a vertical position.
Worn Grip