ENGLISH
USER MANUAL
JB SYSTEMS
®
4/9
MULTIBEAM LASER
4. DMX OUTPUT:
3pin female XLR-connector used to connect the laser with the next unit in the DMX
chain.
5. DMX INPUT:
3pin male XLR-connector used to connect universal DMX-cables. This input receives
instructions from a DMX-controller.
6. HANGING BRACKET:
for hanging the Multibeam Laser in
horizontal position.
7. ON/OFF KEY ACTIVATED SWITCH:
used to switch the laser
beam on/off. Use the keys to make sure only an authorized
operator is able to switch the laser on.
8. MAINS IN- AND OUTPUT:
with IEC socket and integrated fuse
holder, connect the supplied mains cable here and link a second
Multibeam Laser (you can use our JB Systems combi cable
IEC/XLR)
9. INTERLOCK input:
used to connect the optional emergency stop switch (see picture). When you push
this switch it will activate the mechanical safety shutter so the laser beam will disappear immediately.
IMPORTANT! For your own safety we strongly recommend to connect this optional switch!
10. M-DMX INPUT:
Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ
®
and you will get wireless DMX! Moreover you will be able
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
®
.
The separate
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)
11. MENU BUTTON:
used to browse the different functions and working modes in the menu.
12. UP BUTTON:
used to go to the upper option or to increase a parameter of a function or working mode.
13. DOWN BUTTON:
used to go to a lower option or to decrease a parameter of a function or working mode
14. ENTER BUTTON:
Used to confirm the selected value or function that is shown on the display.
15. COOLING FAN:
used to cool the components inside the enclosure. Make sure to never cover this fan
outlet!
16. POWER LED :
Indicates that the unit is switched on.
17. MUSIC LED :
in music mode this LED blinks to the rhythm of the music.
18. MIC :
The built-in microphone is used to synchronize the laser show to the beat of the music.
19. MIC SENSITIVITY :
This potentiometer is used to adjust the music input sensitivity. Turn the
potentiometer until the laser works in sync with the music.
20. IR :
IR-sensor, used to control the unit by the wireless IR remote control.