JB Systems MULTIBEAM LASER Operation Manual Download Page 3

ENGLISH 

 

USER MANUAL 

 

 
JB SYSTEMS

®

 

1/9 

MULTIBEAM LASER 

OPERATION MANUAL 

 
Thank you for buying this JB Systems

®

 product. To take full advantage of all possibilities and for your own 

safety, please read these operating instructions very carefully before you start using this unit.  
 

FEATURES 

 

  A superb 850 mWatt Class-3B  RGRB color laser equipped with 4 powerful, temperature controlled lasers: 

  2 x 150mW Red laser (650nm) 

  1 x 50mW Green laser (532nm) 

  1 x 500mW Blue laser (450nm) 

  The 4 user modes make this laser very easy to use: 

 

MUSIC CONTROL:

  100% plug & play, just connect the laser to the mains to start an incredible, 

music controlled, laser show based on the internal patterns! Perfect for hiring companies!!! 

 

MASTER/SLAVE mode:

  Several units can be used in completely synchronized music mode: 

amazing and very simple to use! 

 

AUTOMATIC mode:

 all internal programs will be shown automatically, no music needed. Depending 

your needs you can choose a fast or soft show. 

 

DMX mode:

 two options possible: 

  2 channel for extremely easy setup and use! 

  10 channels to take full control of all internal programs! 

  LED-display for easy navigation in the setup menu. 

  Perfect for use in clubs, discotheques, mobile DJ’s and many more … 

 

Prepared for wireless DMX:

 just plug-in an optional WTR-DMX DONGLE ! (Briteq

®

 order code: 4645) 

 

SAFETY FIRST!

  Class-3B  lasers (more than 500mW output) can damage the human eye very badly so 

never buy such high power laser without checking if it passed the severe laser safety tests! This laser 
complies to the European EN 60825-1:2014  for Laser Safety! It is equipped with extra safety measures 
like: 

 

Interlock connection with mechanical shutter

: press the safety switch to shut down the output.

 

 

Key switch: 

only authorized and well trained operators are allowed to use the laser.

 

 

BEFORE USE 

  Before you start using this unit, please check if there’s no transportation damage. Should there be any, do 

not use the device and consult your dealer first.  

 

Important: 

This device left our factory in perfect condition and well packaged. It is absolutely necessary 

for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused 
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects 
or problems caused by disregarding this user manual. 

  Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user 

manual. 

Check the contents: 

Check that the carton contains the following items: 

  MULTIBEAM LASER 

  2 keys (for key switch) 

  Mains cable 

  Operating instructions 

  Cable connector for remote interlock 

Summary of Contents for MULTIBEAM LASER













Reviews: