JB Systems MULTIBEAM LASER Operation Manual Download Page 5

ENGLISH 

 

USER MANUAL 

 

 
JB SYSTEMS

®

 

3/9 

MULTIBEAM LASER 

LASER SAFETY INSTRUCTIONS: 

  According to the EN 60825-1:2014  regulations, this laser falls under the classification 3B. Direct eye 

exposure can be dangerous. 

 

DANGER: LASER RADIATION ! 

Avoid direct eye exposure! Laser radiation can cause eye damage 

and/or skin damage. All protective measures for a safe operation of 

this laser must be applied. 

 

  This product is a so-called  show laser, emitting radiation with a wavelength spectrum between 400 and 

700 nm and producing lighting effects for shows. 

  Due to the construction of this laser, the beam is moved so fast, that it can only hit the eye very short. This 

is why the use of this laser for a Laser-Light-Show can 
be regarded as save. 

  Never direct the laser beam to people or animals and 

never leave this device running unattended. 

  This laser may only be used for shows. The operation 

of this class 3B show laser is only allowed if it is done 
by a professional operator. 

  Depending on the classification, operating a laser 

product can produce laser radiation that may cause 
permanent eye damage and/or skin damage. The 
legal instructions for using a laser product vary from country to country. The user must always inform 
himself on the legal instructions valid in his country and apply them to his situation. 

Please note that 

JB Systems

  cannot be made liable for damages caused by incorrect installations and 

unskilled operation! 
 

DESCRIPTION: 

 

 

1.  HANGING BRACKET :

 for hanging the Multibeam Laser in vertical position. 

2.  SAFETY EYE:

 used to attach a safety cable when the unit is rigged (see paragraph “overhead rigging”) 

3.  DISPLAY:

 shows the different working modes with their respective options and settings

 

 

Summary of Contents for MULTIBEAM LASER













Reviews: