ENGLISH
USER MANUAL
JB SYSTEMS®
6/6
MINI-PAR 12TC
05CH Mode
DMX
Channel
DMX-value
function
1
000-255
Red color dimmer
2
000-255
Green color dimmer
3
000-255
Blue color dimmer
4
000-255
Master Dimmer
5
000
No Effect
001-010
Sound Control
011-255
Strobe Slow to fast
MAINTENANCE
•
Make sure the area below the installation place is free from unwanted persons during servicing.
•
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
•
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
•
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
•
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
•
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the
unit’s optics.
•
Clean with a soft cloth using normal glass cleaning products.
•
Always dry the parts carefully.
•
Clean the external optics at least once every 30 days.
•
Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
This device was designed to produce decorative effect lighting and is used in light show systems.
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Mains Input:
AC 100~240V, 50/60Hz
Max. Power consumption:
10W
Sound Control:
Internal microphone
DMX connections:
3pin XLR male / female
DMX channels:
3 / 5 ch Ledcon-02 Mk2 mode
Par LEDs:
12x 3Watt RGB
Led’s
Working temperature:
10°C to 40°C
Size:
150x160x90mm
Weight:
0.4 kg
All the information is subject to change without prior notice You can download the latest version of this user
manual on our website:
