JB Systems LIVESET 2, Operation Manual, Page: 8 / 16

ENGLISH USER MANUAL
JB SYSTEMS
®
6/13 LIVESET 2
5) CONTROLLED VIA THE WIRELESS FOOT CONTROLLER:
The LIVESET can be controlled by the supplied wireless foot controller
To be able to do this, you have to activate this function in the LIVESET so the bar can receive the
commands from the wireless foot controller:
•
Press the [MENU] button until the display shows [SyS].
•
Press [ENTER]
•
Use the [UP/DOWN] buttons to select [W-En]
•
Press [ENTER]
•
Use the [UP/DOWN] buttons to select [on]
•
Press [ENTER] to confirm the setting
You can now use the foot controller
Functions:
FUNCTION
AUTO Starts the automatic programs
SOUND Starts the sound controlled programs
COLOR
Select a fixed color
→
Red
→
Green
→
Yellow
→
Dark Blue
→
Fuchsia
→
Light Blue
→
White
→
BLACKOUT Shuts down the light output
6) CONTROLLED VIA DMX:
The LIVESET can be controlled by any standard DMX-controller in several different DMX-modes.
•
Connect the DMX input of the unit to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.
•
Press the [MENU] button until the display shows: [DMH].
•
Press the [ENTER] button to enter this option
•
The actual DMX address is shown on the display.
•
Press the [ENTER] button again to access the DMX settings
•
You can now change the DMX mode
•
Use the [UP/DOWN] buttons to select the desired DMX-mode. (1CH, 4CH, 18CH or 19CH)
Remark: the modes [LC02] and [LCHL] are used when you combine the unit with our special projector
controllers Ledcon-02 Mk2 and Ledcon-XL. (see chapter below)
•
Press the [ENTER] button to confirm your choice.
•
Now you can use the [UP/DOWN] buttons to set the DMX address. [dxxx]
•
Press the [ENTER] button to confirm your choice.
Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected.