ENGLISH
USER MANUAL
JB SYSTEMS
®
4/13
LIVESET 2
HOW TO SET UP AND CONTROL THE UNIT
You can operate the unit in several ways:
1) FULL AUTOMATIC STANDALONE MODE:
The effect automatically runs a preprogrammed sequence. Select this mode when only 1 LIVESET is used
(standalone) or when the unit is placed as the first (master) unit in a chain with several LIVESET units.
•
Press the
[MENU] button until the display shows [Aut].
•
Press the [ENTER] button to confirm your choice.
•
Now you can use the UP or DOWN buttons to select the desired effect group:
o
[AutP] Automatic RGB projector show.
▪
Press [ENTER] to select this mode.
▪
Use the [UP] and [DOWN] buttons to select one of the 13 shows [AP01
– AP13]
▪
Press [ENTER] to confirm your setting
▪
Use the [UP] and [DOWN] buttons to select the desired show speed from [S.01]
slow to [S.99] fast
▪
Press [ENTER] to confirm your setting
o
[AutF] Automatic white flash show.
▪
Press [ENTER] to select this mode.
▪
Use the [UP] and [DOWN] buttons to select one of the 11 shows [AF01
– AF11]
▪
Press [ENTER] to confirm your setting
▪
Use the [UP] and [DOWN] buttons to select the desired show speed from [S.01]
slow to [S.99] fast
▪
Press [ENTER] to confirm your setting
o
[AutM] Automatic mixed effects show.
▪
Press [ENTER] to select this mode.
▪
Use the [UP] and [DOWN] buttons to select one of the 3 shows [AM01
– AM03]
▪
Press [ENTER] to confirm your setting
▪
Use the [UP] and [DOWN] buttons to select the desired show speed from [S.01]
slow to [S.99] fast
▪
Press [ENTER] to confirm your setting
If you want a program where the 4 projectors do exactly the same, you can enable the
SYNC mode
.
•
Press the
[MENU] button until the display shows [SyN].
•
Press the [ENTER] button to enter the mode.
•
Use the UP or DOWN buttons to select [Sy-A]
•
Press the [ENTER] button to enter the mode.
•
Now you can use the UP or DOWN buttons to select the desired speed
•
Press the [ENTER] button to enter button to confirm
You can connect several LIVESET units together: just put the first unit of the chain in one of the automatic
effect modes and all other units in “Slave mode” (display shows “SLA”) to make them all work in perfect
sync!
2) SOUND CONTROLLED STANDALONE MODE:
The LIVESET runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1
unit is used (standalone) or when the unit is placed as the first (master) unit in a chain with several units.
•
Press the
[MENU] button until the display shows [Sou].
•
Press the [ENTER] button to confirm your choice.
•
Now you can use the UP or DOWN buttons to select the desired effect group:
o
[SouP] Sound controlled RGB projector show.
▪
Press [ENTER] to select this mode.
▪
Use the [UP] and [DOWN] buttons to select one of the 13 shows [SP01
– SP13]
▪
Press [ENTER] to confirm your setting
o
[SouF] Sound controlled white flash show.
▪
Press [ENTER] to select this mode.
▪
Use the [UP] and [DOWN] buttons to select one of the 10 shows [SF01
– SL10]
▪
Press [ENTER] to confirm your setting
o
[SouM] Sound controlled mixed effects show.
▪
Press [ENTER] to select this mode.
▪
Use the [UP] and [DOWN] buttons to select one of the 3 shows [SM01
– SM03]