ENGLISH
USER MANUAL
JB SYSTEMS
®
10/13
LIVESET 2
143-161
Show 8
162-180
Show 9
181-199
Show 10
200-218
Show 11
219-237
Show 12
238-255
Show 13 (Random)
RGB Automatic Program Speed
17
000-243
Speed
Slow to Fast
244-255
Sound
Sound controlled
White Led Programs
18
000-009
Blackout
White Led Shows
010-031
Show 1
032-053
Show 2
054-075
Show 3
076-097
Show 4
098-119
Show 5
120-141
Show 6
142-163
Show 7
164-185
Show 8
186-207
Show 9
208-229
Show 10
230-255
Show 11 (Random)
White Led Automatic Program Speed
19
000-243
Speed
Slow to Fast
244-255
Sound
Sound controlled
A. Controlled by the LEDCON-02 Mk2:
Follow the steps below to control the bar using the
LEDCON-02 Mk2
•
Connect the DMX input of the unit to the DMX output of the
previous unit in the chain or directly to the DMX-output of your
controller.
•
Press the
[MENU] button until the display shows: [DMH].
•
Press the [ENTER] button to enter this option
•
The actual DMX address is shown on the display.
•
Press the [ENTER] button again to access the DMX settings
•
You can now change the DMX mode
•
Use the [UP/DOWN] buttons to select the DMX-mode [LC02]
•
Press the [ENTER] button to confirm your choice.
•
Now you can use the [UP/DOWN] buttons to set the DMX address. [dxxx]
•
If you use the LEDCON-02 in 4CH mode you have to select DMX address 001
(also select this mode and channel if you are using only 1 light bar)
•
If you use the LEDCON-02 in 8CH mode and you want to use the bar for the first 4 channels (first
4-bar) you have also to select DMX address 001
•
If you use the LEDCON-02 in 8CH mode and you want to use the bar for the last 4 channels
(second 4-bar) you have to select DMX address 017
•
Press the [ENTER] button to confirm your choice.
Note:
the display blinks when the unit is in DMX-mode and no DMX-signal is detected.