ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
9/10
CAM-LITE 200
•
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected.
•
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
•
The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
•
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
pa
rticularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.
•
Clean with a soft cloth using normal glass cleaning products.
•
Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS:
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Mains Input:
AC 100V
– 240V, 50/60Hz
Internal fuse:
250Vac / T6.3A
Power connections:
Lockable Power Connector 10A - Neutrik
®
PowerCON compatible (in /
out)
Power consumption (full power):
210 Watt
Daisy chaining:
7pcs (@ 240Vac)
IP-rating:
IP20 - indoor
DMX connections:
3pin XLR male / female
DMX channels used:
2, 4 channels
LEDs:
1200pcs 0,2W Cold white + 1200pcs 0,2W Warm white
Color temperature (CCT):
3000K (WW)
→ 6300K (CW) - (Full : 4200K)
CRI-factor:
92 (Full)
– 92 (warm white) – 88 (cold white)
Beam angle:
110°
LED refresh rate:
800, 1200, 2000, 3600, 12000 and 25000Hz
Ambient temperature:
40°C
Size (L x H x D):
see drawings
Weight:
9kg
