JB-Lighting Varyscan 4 1200 HMI, Operating Instructions Manual

Page: 62 / 69

62
Varyscan* 4 1200 HMI
Occupation DMX-In / DMX-Out
Position of sockets see page 5
DMX-IN DMX-OUT
Pin1:
ground black Pin1: ground black
Pin2: DMX- beige Pin2: DMX- beige
Pin3: DMX+ red Pin3: DMX+ red
Pin4: frei Pin4: frei
Pin5: + 5V green Pin5: frei
Technical data
Measurements: hight
100cm
width 34cm
depth 24cm
Weight: 36 kg
Power consumption: ca. 1725W
Mains Voltage:
230V 50Hz 7,5A kompensiert
Bulb : Osram 1200 HMI
Fuse: 16 ampere inert
Change of Eprom/ Software Update
To change the Eprom proceed as follows:
Remove the cover sheet for the electronic board below the mirror by taking out the 4 screws
(see sketch page 36). By comparing the electronic board with the plan of electronic parts you
can see the Eprom at the right side (IC U2). Carefully lever the used Eprom from the holder and
exchange it for a new one.
Direction: Pay attention to the polarity of the Eprom!