JB-Lighting Varyscan 4 1200 HMI, Operating Instructions Manual

Page: 43 / 69

43
Varyscan* 4 1200 HMI
Before you, you find the complete Varyscan*equipment.
First of all, take all parts from the carton.
Varyscan*
1200 HMI
these operating instructions
Check, if the delivery contains all parts.
Should you notice a damage through transportation, please immediately inform the carriers
respectively your dealer. Also in case of noticing missing parts.
The packing of Varycolors will be used several times- if possible- because of conservation. In
case of returning packings you will get a part-credit.
Please make use of the return of packings within the meaning of our environment.
For this reason we ask for your comprehension, also in case of getting a used packing
respectively inlay from us.
Put in/ Exchange of the Bulb
Warning : Before opening pull out mains plug!
Loosen the screws at the lid of your Varyscan* with a suitable
screw-driver and lift the lid (label Varyscan* 4 1200 HMI). You
can see the bulb holder in the back third of your Varyscan* (see
sketch page 4). Now detach nuts No.1 and No.2 and remove the
bulb from it's holder. Put the new HMI bulb into the holder and
tighten nuts No.1 and No.2 by hand. The point on the glass of
the bulb should on no account point to the concave mirror, respectively to the lenses (sketch
page 4), it should point to the base sheet or to the lid. Take care that the bulb is tightened in the
holder.
Warning : Never touch the glass of bulb of the 1200 HMI bulb itself!
An adjustment of the bulb is not necessary.
Starting the Equipment
1. Hang up of Varyscan*