JB-Lighting Varyscan 4 1200 HMI, Operating Instructions Manual

Page: 46 / 69

46
Varyscan* 4 1200 HMI
DIP-switch position: DIP-switch No.2 switch 2 off , switch 3 on
3. JB lighting 6 channel drive mode
channel 1
x-motor
channel 2 y-motor
channel 3 gobo
channel 4 colour
channel 5 dimmer/shutter
channel 6 iris/gobo rotation
DIP-switch position: DIP-switch No.2 switch 2 and 3
on
Reset on DMX: DIP-switch No.2 switch 4
If you would like to reset your Varyscan* from your DMX-desk, turn switch 4 on at DIP-switch
No.2. Now you have the possibility to reset your Varyscan*, if you transmit DMX-factor 255 via
gobo channel.
If switch 4 at DIP-switch
No.2 is turned off, reset on DMX
is not possible.
Adjustment of DMX-Addresses: DIP-switch No.1 switch 1-9
Depending on the optional drive mode, you have to adjust DMX-addresses as follows. The
addressing works by a binary numeral system and in 6 channel drive mode it has to follow in six
steps.
Varyscan*
No. DMX-address DIP-switch position
1
1